Top
How To Measure Fitter For Glass Shade

How To Measure Fitter For Glass Shade

How To Measure Fitter For Glass Shade? The size of the glass shade is measured from the bottom of the fitter’s lip to the top of the shade. It is also the outside size of the lips that is then inserted in the shade holders of the fixtures. It will be a bit smaller than the size of the fitter so that it will fit into the shade holder of the same size.

Shade holders are typically made of metal, which holds the shade onto the lamp or fixture. Please see the “before” picture below.

How To Measure Fitter For Glass Shade

The fitter is the part in the shareholder where the glass lampshade goes and comes into actual contact with the lamp. Shade holders are available in various size fitters, as do glass lampshades.

The rationale is to have the same size or fitter shade holders and shade. You might think it’s easy. But before you begin seeking out a shadow of the proper size, it is essential to know the kind of shade holder you’re using on the lamp or fixture you are using.

Before we discuss how to measure fitter for glass shade, we need to discuss the type of folder.

Determine Your Type Of Holder: Fixture-Type Or Straight

How To Measure Fitter For Glass Shade - Determine Your Type of Holder: Fixture-type or Straight

One kind of holder is a fixture holder, which is usually used on fixtures that hang pan lights, etc., and makes use of small screws to secure the lampshade in its place see the image.

The screws are required because, in the case of the earlier electronic fixture, holders “face” down. If the screw in light fixture cover isn’t securely secured against the shade’s fitting, they could drop. Shades designed for institutions generally come with a “lip” type fitter see the figure.

The shade’s fitter is the part of the shade placed into and is in contact with the lamp holder. The lip’s shape fitter assists in locking the shade in place and stops it from falling off the holder even when the shade holder “faces” down. Shades made of gas fixtures, shade shades, and pendant shades typically include lip fittings.

Another kind of shade holder typically found is a straight shade holder. There are no set screws required because the holders are always placed in an upright position which means that the lower edge or fitting that is the edge of the shade sits inside the opening of the shade holder see the figure.

Tripod shade holders, also known as “spiders,” do not require screws and work precisely the same way as straight holders.

Shades placed within straight type shade holders always come with “straight” fitters, meaning that the edges that touch the holders are straight. Refer to the figure.

You can put a “lip” fitter shade in straight-type shade holders, but the fitting and application may be off or unmatched, creating a noticeable but not common shade age mistake.

Determine The Fitter Size Of Your Shade Holder

How To Measure Fitter For Glass Shade - Determine the Fitter Size of Your Shade Holder

After you’ve chosen the kind of shade holder your fixture or lamp has, The next step is to choose the appropriate dimensions of your shade holder. The size most suitable for your shareholder will be the opening size within the holder, where the glass shade “fitter” passes.

Dimensions of fixture type shade and shade holders have been standardized in North America and are found in various sizes.

The dimensions and styles of fittings they come in are based on two-quarter” electric-era light fixture shade, 2 1/2″ gasolier shades that are 3 1/4″ fixture and pendant 4″ and five” gas & pendant shades, and 6″ large shades for hanging lamps as well as pendant shade slants.

How To Measure Fitter For Glass Shade

How To Measure Fitter For Glass Shade - How To Measure Fitter For Glass Shade

Make sure to screw the set screws out before measuring the shade holder’s fitting. Some odd dimensions can be seen on older fixtures, and it is essential to measure the light fitter accurately.

It is crucial to remember that typically the proper size of the lampshade for straight and fixture-type shade holders will have a measured fitter size that is just a little smaller than the typical sizes, but never more than. Below are some lamp shade fitter types.

The most commonly used dimensions for straight-fitting shades and holders include 1 5/8″ hurricane shades, 4″ ball shades, certain shades made of gas, such as shades that are 6-1/2″ astral, 7″ 10″, 12″ student shades, and 14″ hanging shade and lamp domes.

Another type of holder and a different fitter size, which isn’t in the scope of those mentioned above, is used for the torchiere lamps on floors. Most torchiere lights come with 2 3/4″ fitted size shades and bugle-shaped holders. Find 2 3/4″ fitting size shades for these lamps that are large.

Glass lampshade replacement must always start by assessing the shade holder’s kind, then size. Our catalog has the appropriate size for each lampshade made of glass. It serves as a helpful guide.

What type of holder do I have?

Once you’ve established how big your glass shade you’ll need to determine the shade holder’s type, a fixture is also lip-type or straight. Fixture-type holders are commonly used for hanging fixtures.

In the majority of institutions, holders will be “face down.” They utilize small screws to secure the lampshade. If the screws aren’t correctly connected, the shade could be thrown from the holder onto the floor. The holders of this kind typically come with the “lip” type fitter.

The other kind of holder is the straight kind. They don’t require screws because they typically sit set up correctly in which the fitting is in the shade’s holders.

When the glass shade breaks or you’d like to update your appearance, keep in mind these essential elements, and you’ll find an excellent replacement quickly! Think about changing the entire lighting fixture with a more energy-efficient LED alternative when you’re done.

Conclusion – Fitter For Glass Shade

Lampshades enhance your room and can break up the monotony of your space but without costing an arm. It is essential to choose the right size, and this can be done by using the size chart of lampshades while looking for one.

This will save you from mistakes and unneeded trial and error. It is crucial to remember that lampshades need to be used with lamp harps because they form part of valuable parts.

There are many gorgeous lampshade tips and even purchase online; however, if you want physical customer service, go to a shop to have a more personal shopping experience. Choosing a convenient item and providing sufficient lighting for every occasion is essential.

We wish you the best of luck when you add the look and feel of your interiors with the perfect sizes of lampshades Image within this lamp shade size guide is taken by James Orr on Unsplash.

Sophia Carl

Sofia Carl is an interior designer. She specializes in designing residential and commercial spaces, with a focus on creating timeless and functional interiors that reflect her clients' individual styles. Sofia's work has been featured in numerous top-notch publications!